Led line light installation method

 
2020-08-06 17:19:37  

With the change of life style, people spend most of their time at work, and they may work overtime in the evening. In such a city, if it is dark everywhere, it is so pathetic for a city. Only zero zero point yesterday light, so in order to beautify the city, but also in order to facilitate the night out of the people, know road signs, so now where the lighting project is done, especially some hotels, office buildings, summer, and so on these places, lighting project is absolutely indispensable.



Led line light installation method - Wiring method


The general voltage of LED line lamp is AC220V, DC12V and DC24V, so it is necessary to choose the appropriate switching power supply, and the power supply size is determined according to the power and connection length of LED light strip. It should be noted that DC12V and DC24V should not be connected to AC220V, otherwise all lamp beads will be burnt out. DC12V cannot be connected to the control power of DC24V; Otherwise the power will increase more than one time, also easy to burn out lamp bead. AC220V lamp belt can be directly connected to the power supply. RGB colorful LED tape needs to use the controller to realize the changing effect, generally using 4 lines to distinguish black, red, green and blue. The colorful light strips are generally of common anode, that is, there is a +12V black wire above the light strip, and the others are negative electrode. RGB is connected to the corresponding red, green and blue interface or power cord.


Led line light installation method - Connection distance

Generally speaking, the longest connection distance of 3528 series LED line lights is 20 meters, and the longest connection distance of 5050 series LED belts is 15 meters. If the connection distance is exceeded, the LED line light will get hot easily, and the service life of the LED line light will be affected during the use. The RGB simple controller has a control distance of 10 to 15 meters, and the remote controller has a control distance of 15 to 20 meters, with a maximum control distance of 30 meters. If the LED line light has a long connection distance and the controller is unable to control the length of the light bar, then a power amplifier is required for tapping. Therefore, the installation must be in accordance with the manufacturer's requirements for installation.